Control Transformer Accessories


Picture: Fuse Kit
Picture: SafeTouch Terminal Covers

Primary Fuse Kit

In addition to factory installed primary fusing capability, Micron offers a primary fuse kit for ImperiTRAN and ValuTRAN for field installation. The primary fuse kit includes a 2-pole class cc fuse block, instructions, and all associated mounting and wiring hardware. Additionally, this fuse kit will fit most competitors units. The primary fuse kit, when installed, will add a maximum of 11/16″ to the transformer “A” dimension and 1-15/16″ to the “C” dimension. To order, call 800 664-4660 and request catalog number FKTP-1001.

SafeTouch Terminal Covers

SafeTouch terminal Covers are optionally available for GlobalTRAN as well as other ImperviTRAN and ValuTRAN transformers, and meet the fingersafe or touch-proof requirements for IEC specification 529 IP20 degree specification for protection. Covers are available in kit form for the transformer, either with or without secondary fuse clips. When installed, the covers prevent contact with current-carrying parts.

Catalog No. Description
TPTC-1001 Individual 4-terminal cover kit
TPTC-1002 Individual 6-terminal cover kit

SafeTouch Fuse Block Cover Kits

New SafeTouch terminal covers are optionally available for GlobalTRAN as well as other ImperviTRAN and ValuTRAN transformers for the primary fuse block. Featuring Micron’s patented easy-open latch mechanism that allows the use of any small pointed object such as a small screwdriver or ball-point pen to release the cover for removal, the new design meets the IP20 fingersafe or touch-proof requirements for IEC specification 529, preventing contact with current-carrying parts.

Catalog No. Description
TPTC-1006 Individual fuse block cover kit, 2-pole

Low Voltage General Purpose Transformer Accessories


Picture: Wall Mounting Brackets
Picture: Weather Shield Kit

Wall Mounting Brackets

Wall mounting brackets are used to mount most 15 through 75 KVA and some 100 and 112.5 KVA Type 1-V and 3-V transformers. This bracket allows for 6″ clearance from the wall as recommended by Micron.

Catalog No. Description
WMB01MI Wall Mounting Bracket

Weather Shield Kit

A weather shield kit consisting of a front and rear cover shield must be installed on all ventilated dry-type distribution transformers when the unit is located outdoors. The shields protect the transformer top ventilation openings against rain but allow for proper ventilation. Field installation hardware is not required. Refer to specific transformer listing for selection of weather shield kit.

Number Fits Frame Size(s) KVA Range
WS1OM 808 10-15
WS11M 809.810.811 15-50
WS12M 812.813 50-100
WS13M 814 167
WS30M 909 7.5-15
WS31M 910.911.912 15-45
WS32M 913A. 914A. 915A 45-112.5
WS33M 916 112.5-150
WS34M 917,918 150-300
WS35M 919,920 300-700
WS36M 922 500 (Non-linear)

Terminal Lug Kits for Type 3-V Transformers

Catalog
Number
Typical
Sizing
Terminal Lugs
Cable Range
Qty. Hardware
Bolt Size
Qty.
LKS1MI 15-37.5 KVA
Single Phase
#14-#2 8 1/4-20×3/4 8
15-45 KVA
Three Phase
#6-250 MCM 4 8
LKS2MI 50-75 KVA
Single Phase
#6-250 MCM 12 1/4-20×3/4 8
75-112.5 KVA
Three Phase
1/4-20×1 3/4 8
LKS3MI 100-167 KVA
Single Phase
#6-250 MCM 3 1/4-20×3/4 3
150-300 KVA
Three Phase
#2-600 MCM 22 3/8-16×2 16
LKS4MI 500 KVA
Three Phase
#2-600 MCM 29 3/8-16×2 18

Rodent Screens

Rodent screens are used to discourage entry by birds or rodents.

Catalog No. Frame Size(s)
RSO1MI 909
RSO2MI 910, 911, 912
RSO3MI 913A, 914A, 915A
RSO4MI 916
RSO5MI 917, 918
RSO6MI 919, 920

To order, call 800 664-4660.